Condimentum rhoncus, sem quam semper libero, sit amet adipiscing sem neque sed ipsum. Nam quam nunc, blandit vel, luctus.

What is hot-dip galvanized pipe?

Nov 13, 2022 Leave a message

In order to improve the corrosion resistance of hot-dip galvanized steel pipes, general steel pipes are galvanized. Galvanized steel pipes are divided into hot galvanizing and electro galvanizing. The hot galvanizing layer is thick, the cost of electro galvanizing is low, and the surface is not very smooth.

Nominal wall thickness: mm2.0, 2.5, 2.8, 3.2, 3.5, 3.8, 4.0, 4.5;

Coefficients: c1.064, 1.051, 1.045, 1.040, 1.036, 1.034, 1.032, 1.028.

The mechanical property of steel is an important index to ensure the final use performance (mechanical property) of steel, which depends on the chemical composition and heat treatment system of steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength, yield strength or yield point, elongation), hardness, toughness indexes, as well as high and low temperature properties required by users are specified. Grade of galvanized pipe steel: Q215A; Q215B; Q235A; Q235B。

Test pressure value/MPa: D10.2-168.3mm is 3Mpa; D177.8-323.9mm is 5Mpa.

Galvanized steel pipe is divided into cold galvanized pipe and hot galvanized pipe. The former has been banned, and the latter is also advocated to be usable by the state.

1. Uniformity of zinc coating: steel pipe sample shall not turn red (copper plating color) after being immersed in copper sulfate solution for 5 times continuously.

2. Surface quality: the surface of galvanized steel pipe shall have a complete zinc coating, and there shall be no unplated black spots and bubbles, and small rough surfaces and local zinc nodules are allowed.

3. Weight of zinc coating: according to the requirements of the Demander, zinc coating weight of galvanized steel pipe can be measured, and the average value shall not be less than 500g/m2, and any sample shall not be less than 480g/m2.

Cold galvanized pipe: cold galvanized refers to electro galvanized pipe. The amount of galvanizing is very small, only 10-50g/m2, and its corrosion resistance is much different from that of hot galvanized pipe. In order to ensure the quality, most of the regular galvanized pipe manufacturers do not use galvanization (cold plating).


Send Inquiry

Send Inquiry