Condimentum rhoncus, sem quam semper libero, sit amet adipiscing sem neque sed ipsum. Nam quam nunc, blandit vel, luctus.

What Is A Wire Conduit?

Sep 06, 2021 Leave a message


"Wire conduit" refers to a durable tube or other type of enclosure used to protect and provide a path for individual electrical wires. It is usually necessary to use conduits where the wires are exposed or where the wires may be damaged. The catheter can be made of metal or plastic, and can be rigid or flexible. All conduits are equipped with compatible accessories (couplings, elbows, connectors) and electrical boxes, usually made of the same or similar materials. The conduit must be installed in accordance with the National Electrical Code (NEC) and all applicable local regulations.

(1) Rigid metal conduit—RMC and IMC:

The rigid metal conduit RMC is a heavy-duty galvanized steel pipe fitted with threaded joints. It is usually used outdoors to provide protection, prevent damage, and can also provide structural support for cables, panels and other equipment. The length of RMC is 10 feet and 20 feet, and both ends are threaded.


Intermediate Metal Conduit (IMC) is a thinner, lighter version of rigid metal conduit, and is approved for all the same applications as RMC. Since IMC is lighter and easier to use than RMC, it is more common in new structures.


(2) Electrical Metal Tube-EMT: Another example of rigid electrical conduit is EMT (Metal Conduit), which is most commonly made of galvanized steel, but it can also be aluminum. EMT is also called "thin-walled" catheter because it is thin and light, especially when compared to RMC. EMT is rigid, but it can be bent with a simple tool called a catheter bender.


EMT is equipped with couplings and accessories, and is fixed with fixing screws or compression fasteners. The pipe itself is not threaded like RMC and IMC. Common sizes of EMT include 1/2 inch, 314 inch and 1 inch. It is commonly used for exposed indoor wiring in residential and light commercial buildings. If it is installed in an outdoor exposed location, special waterproof accessories must be used for assembly.


(3) Non-metallic tubing-ENT: Non-metallic electrical tubing (ENT) is a flexible corrugated plastic tubing that has moisture-proof and flame-retardant effects. It is easy to bend and can be installed using snap locks or glued plastic fittings. Unlike EMT, non-metallic pipes cannot be installed in exposed locations, so they are usually used inside walls. In addition to being installed in a standard wooden structure or metal frame wall, ENT can also be installed in a concrete block structure and can be covered with concrete. Because of the blue color, a common brand of the tube, ENT was nicknamed "Smurf Tube" after the Smurfs cartoon character.


(4) Flexible Metal Conduit-FMC and LFMC: Flexible Metal Conduit (FMC) is also called "undeveloped area" after its inventor's name. It has a spiral structure that makes it flexible, so it can meander through walls and other structures. Standard FMC is used in dry indoor places, and is usually used for short-distance operation between wall boxes and motors or fixed equipment (such as garbage disposers).


Liquid Tight Flexible Metal Conduit (LFMC) is a special type of flexible metal conduit that has a plastic coating and is used with sealing fittings to make it watertight. It is usually used with outdoor equipment, such as air conditioning units.


(5) Rigid PVC conduit: Rigid polyvinyl chloride (PVC) is similar to plastic pipes and is equipped with plastic fittings glued in place. It can be bent after heating in a portable heater box. Because the conduit and the fittings are glued together, the conduit assembly can be impermeable, making PVC suitable for many applications that are directly buried in the ground. It is also allowed to be used in corrosive environments.


Send Inquiry

Send Inquiry