Condimentum rhoncus, sem quam semper libero, sit amet adipiscing sem neque sed ipsum. Nam quam nunc, blandit vel, luctus.

There are four basic types of threaded connections:

Oct 24, 2021 Leave a message

.Bolt connection Features: The connected parts are all thinner, and through holes are made on them (threads are not cut). Application: The thickness of the connected parts are all small, not limited by the material of the connected parts, allowing frequent disassembly, and a wide range of applications. 2. Double-ended stud connection Features: One of the connected parts is thicker, a blind hole is made on it, and threads are cut on the blind hole. Thin-piece through hole without thread. Connect with double-ended studs and nuts. Allow multiple assembly and disassembly without damaging the connected parts. Application: Usually used in places where one of the connected parts is too thick, inconvenient to perforate, and requires compact structure. Blind holes must be used for connection or frequent assembly and disassembly. 3. Screw connection Feature: No nut is needed. Pass the screw through the hole of one connected part and screw it into the threaded hole of the other connected part. (The structure is simpler than double-ended studs). Application: Where one of the connected parts is too thick and is not frequently assembled and disassembled. 4. Set screw connection Features: Use a set screw to screw into the threaded hole of another part, and use the end to bear the surface of another part or into the pit of the part. Application: Fix the relative position of two parts, and can transmit small force or torque.

Send Inquiry

Send Inquiry